Pool renovations. Epoxy pool paint. Free quotes here.
Need to paint your pool?

Direct Pool Supplies now has available the Luxa-Pool paint suitable for pools, ponds & fountains. We have available Chlorinated Rubber and the more widely used 2 pack Epoxy Pool Coating.

With a Marblesheen, Pebblecrete Fibreglass or a Concrete (Painted), pool/spa, generally after 15-20 years the original surface will be worn, tired and need to be resurfaced. It may even be less than10 years if the pool surface is poorly finished or has had a lot or wear and tear.

Over time you will find the pool surface starts to break down and becomes porous, becomes difficult to keep clean, harbouring dirt and bacteria. It may even start to crack and blister. Certainly it will have lost it “when new” finish.

On no account should pool water be allowed to get into the pool structure. If water does, it will cause expensive (corrosion/rotting) damage to the structure.

The advantages of painting your pool (& spa) are:

• Decorative - Over 20 colours available in the Luxa-Pool range.
• Seamless
• Easy to clean
• Long lasting
• Economic
• Can “do it yourself”
• Great effects achievable as per picture

.We recommend at least two coats of epoxy pool paint (preferably three) for a longer lasting finish.

We have available all the application data sheets, colour charts for all types of pool surfaces to help you through the DIY process. Make sure you read carefully all the instructions as preparation is most important.

All the information you will require is available for download on the following page. Print out all these sheets and read through them carefully. We also have some videos on acid washing & painting your pool which should be very beneficial.

Download the pool area calculator here so you know how much paint you require..
Full colour chart here 

	3.5 litre Epoxy Pool Paint Kit The 3 colours at left are the most popular. All other colours in the drop down list. Full colour chart above. 1 x kit will cover approximately 20-25 sq mtrs. Minimum 2 coats required.  Average pool 50,000 - 60,000 litres will require approximately 5-7 x 3.5L kits for a two coat finish.	Price:	QTY:
		Pool Paint Colour Pacific Blue Mid Blue Adriatic Regency White Riversand Desert Gold Fern Green Rainforest Spring Apple Emerald Green Pond Green White Brook Green Aqua Mist Jacaranda Crestwood Tahitian Misty Blue Serenity Tempest Grey Platinum Blue Black

	3.5 litre Designer Colour Epoxy Pool Paint Kit These "Designer" colours are slightly more expensive than the above.1 x kit will cover approximately 20-25 sq mtrs. Minimum 2 coats required.  Average pool 50,000 - 60,000 litres will require approximately 5-7 x 3.5L kits for a two coat finish.	Price:	QTY:
		Pool Paint Designer Colour Devonport Atlantis Slate

	4.0 litre Epoxy Primer Sealer Kit You need this primer sealer for a new concrete pools or "difficult surfaces" such as Marblesheen, Quartzon & Pebblecrete. Around 3 packs required for the average size pool.	Price:	QTY:

	2.0 litre Concentrated Wash For cleaning down your pool. 2 litres makes up 80 litres.	Price:	QTY:

	500 mL Contrentrated Wash For cleaning smaller pools or ponds etc...  500 mL makes 20 litres.	Price:	QTY:

	4.0 litre Epoxy Solvent LT This solvent is for cleaning your equipment and for clean up of spills.	Price:	QTY:

	1.0 litre Epoxy Solvent LT This solvent is for cleaning your equipment and for clean up of spills.	Price:	QTY:

	4.0 litre Acetone You can use this acetone to thin down the first coat if required.	Price:	QTY:

	1.0 litre Acetone You can use this acetone to thin down the first coat if required.	Price:	QTY:

	Complete pool roller kit Make sure you always use the high quality brushes & rollers designed especially for epoxy pool paint. Includes roller, brushes, tray & special paint stirrer	Price:	QTY:

	50mm Craftway Brush Use this brush for around edges and hard to reach places.	Price:	QTY:

	Epoxy Paint Stirrer Special stirrer for the pool paint.	Price:	QTY: